How To Adjust Bobbin Tension Sewing Machine

If you struggle to adjust the bobbin’s tension, you are not alone. This is one of many people’s most common problems while sewing. You can fix this problem with some simple steps.

How To Adjust Bobbin Tension Sewing Machine?

How To Adjust Bobbin Tension Sewing Machine

Method 1: Manual Sewing Machine

  • Turn the bobbin winder in the direction of the arrow
  • Turn the handwheel in the direction of the arrow
  • Turn the handwheel in both directions

The handwheel will turn at a faster speed. This is caused by the tension being released from the bobbin thread. Adjusting the tension for each step will help you find the perfect balance for your sewing machine.

After you have finished adjusting, ensure both sides of the stitch are even before proceeding with other tasks.

Method 2: Computerized Sewing Machine

If you have a computerized sewing machine, the tension knob is located on the front of your machine. The bobbin tension setting should be set so that it doesn’t slip off its peg when you remove and insert your bobbins.

The tension should be set to the highest level for sewing with thicker materials, and it should be set to a lower level for lightweight sewing fabrics. Check your manual if you don’t know your machine’s default settings. Some machines have adjustable bobbin tension settings that can be changed by turning the dial on top of your machine.

Method 3: Industrial Sewing Machines

If your sewing machine is industrial, you can adjust the tension on the bobbin. This will ensure that your fabric doesn’t roll up during sewing and stays secure.

You must ensure that the bobbin and needle are balanced before setting any tension. You should also check if there are other problems with your machine, such as broken parts or poor lubrication.

If you’re still having trouble with your sewing machine after adjusting the tension, it might be time to get it serviced.

Method 4: Modern Sewing Machines

Modern sewing machines have a built-in bobbin winder. The bobbin is self-winding and controlled by the machine’s computer, which you can set to run at different speeds depending on what fabric you’re sewing.

The bobbin winder is usually located on the side of your machine. Still, some modern models have it built into their bottom (or even top) so that they don’t need to be removed when moving from one project to another.

You can also use the bobbin winder to ensure your thread is wound tightly around the bobbin. This will eliminate any gaps between layers of fabric that might cause the stitching to appear loose or uneven.

Things To Avoid When Adjusting Bobbin Tension In A Sewing Machine

When adjusting the bobbin tension in a sewing machine, keep these things in mind:

  • Don’t over-tighten the bobbin tension. If you need to adjust it by more than 1 mm, please do so slowly and carefully. This is especially important if you are using a new bobbin case or changing needles regularly (which should be done every few hundred stitches).
  • Don’t adjust the tension while the machine is running. If there’s anything wrong with your sewing machine, it could get damaged by trying to fix something that isn’t broken yet! It might cause problems with other parts of your machine, so be careful when doing this!
  • Don’t adjust the bobbin tension while holding down one side of a garment during operation; this could also damage other parts inside it – so don’t do this unless absolutely necessary!!

To keep your sewing machine working in perfect condition, you must follow some simple bobbin tension adjustment instructions.

To keep your sewing machine working in perfect condition, you must follow some simple bobbin tension adjustment instructions. The purpose of bobbin tension is to provide the proper tension on the top thread so that it does not come loose from its spool or fall off from under the presser foot. This will ensure that you can sew efficiently and accurately with a consistent stitch length.


There are many ways to adjust the tension in your sewing machine. When adjusting bobbin tension, you can do it manually or through software. You may also need to make adjustments if you notice that your stitches are not coming out evenly or the stitches are too tight. The most important thing is that you follow the instructions carefully to avoid damaging your machine!

Add a Comment

Your email address will not be published. Required fields are marked *